Features
Fitting Guide
The most basic thing you need to know about your faucet in order to add an auto shut-off device is the threading - either male or female. If your faucet has threads on the outside, it is male threaded - which means you need to use just the FEMALE threaded component. Conversely, if your faucet has threads on the inside, it is female threaded and you'll need to use the included MALE threaded adapter. Our auto shut-off devices work on both MALE and FEMALE faucets and pipes!
Our auto shut-off devices work on "REGULAR" size plumbing. Typical "REGULAR" size for a faucet aerator is 15/16" male threaded or 55/64" female threaded, while "Junior" size is 13/16" male threaded or 3/4" female threaded. Some faucets use a smaller "Tom Thumb" metric-size aerator, which is M18x1 male threaded or M16x1 female threaded. If your faucet or pipe is not "REGULAR" you will need an additional adapter. But wait! Before you get out your tape measure, there's a very easy way to tell what size your plumbing is.
First, take the existing aerator off your faucet - usually these just unscrew, although you may need a wrench if it's on tight. Then grab some spare change from the couch or your rainy day jar, specifically a quarter, a nickel, and a dime. Place the coins over the aerator. If your current aerator is about the size of a quarter, you have a "REGULAR" sized fixture!
If it's about the size of a nickel, you have a "Junior" size aerator. If your aerator is approximately the size of a dime, you have a "Tom Thumb" size aerator. Both "Junior" and Tom Thumb" sizes will need an adapter that you can purchase from the hardware store.
|
it works! 
